Men's 3/2mm Steamer V3

A 3/2mm chest-zip steamer for water between 14 and 20°C. V3 runs the thermal lining down to the knees, strengthens the cuffs and adds a key holder at the chest zip. New short and tall sizes change length only (arms, legs and torso) and keep the same width, so you can match your height.

$395.00

or 4 interest-free payments of $98.75 with Afterpay

Also available: Pay in 4


Short and tall sizes change length only (arms, legs and torso). The width stays the same.

Model: 183cm / 78kg
Shown: size M

Ships from Sydney within 1 business day · Arrives in 2–4 business days

  • Free standard shipping in Australia
  • 100-day free returns
  • 12-month warranty
The build

Size guide

Product Specs

Specifications
Thickness 3mm core · 2mm arms & legs
Material Limestone-based neoprene
Stretch 4-way super-stretch construction
Lining Quick-dry stretch terry lining · thermal to the knees
Exterior Super-stretch nylon
Knee panels Reinforced, textured fabric for greater protection and durability
Panel design 24-panel anatomic construction
Seams GBS (glued and blindstitched), reinforced at stress points · liquid-sealed exterior
Zip YKK chest zip with internal seal panel
Cuffs Smooth-skin wrist & ankle seals
Key holder Key holder at chest zip
Temperature range 14–20°C
Designed in Sydney, Australia

Build Features

  • Close-up of a blindstitched seam on the steamer, the stitch line running alongside the bonded panel join in the neoprene's jersey knit face

    Blindstitched seams

    Glued and blindstitched rather than punched straight through. The needle never fully pierces the neoprene, so the seam doesn't leak.

  • Close-up of bonded seam tape running over a seam inside the steamer

    Taped seams

    Every interior seam is sealed under bonded tape. Nothing left open along the stitch line for cold water to find.

  • Close-up of the brushed thermal terry lining fabric

    Thermal core lining

    Quick-drying stretch terry through the chest, back and thighs — the panels that decide whether you last two hours or one.

  • Close-up of the reinforced knee pad and its overlocked edge

    Anatomical knees

    Pre-bent panels with a ribbed abrasion overlay. Holds shape after a winter of duckdives and dragging up the rocks.

  • Close-up of the wrist cuff with smooth-skin sealing bands

    Sealed cuffs

    Smooth-skin bands close against the wrist and ankle, so the suit stops flushing every time you go under.

  • Close-up of the key loop stitched inside the steamer

    Key holder

    A stitched loop inside the chest. Somewhere for the car key that isn't the wheel arch.

In The Water

Surfer trimming along a small grey wave on a longboard in the V3 steamer, shot from the beach
Surfer sitting astride a longboard on flat grey water, back to camera, FLRC across the shoulders
Surfer standing on an empty beach in the Men's 3/2mm Steamer V3, arms folded, looking out to sea under a clear sky

Reviews

No reviews of the Men's 3/2mm Steamer V3 yet. The previous generation, the Men's 3/2mm Steamer V2, has 29 reviews averaging 4.9.

Write a review (opens in a new tab)

Questions

What water temperature is a 3/2mm wetsuit for?

A 3/2mm steamer like the Men's 3/2mm Steamer V3 is made for water between 14 and 20°C (57 to 68°F). Above 20°C a 1.5mm wetsuit top is enough, and below 14°C you want a 4/3mm steamer with boots. Pick for the coldest water you'll surf, and go a step warmer if you feel the cold.

Is a 3/2mm wetsuit warm enough for winter in Australia?

In Sydney and Perth, yes. Sydney's water averages 18.8 to 19.7°C from June to August and Perth's 19.2 to 21.1°C, which is 3/2mm water. Victoria and Tasmania are colder: Torquay and Hobart average 12.7 to 14.4°C in winter, where a 4/3mm steamer with boots is the better call.

What do the MS, MT and LS wetsuit sizes mean?

V3 adds short and tall fits through the middle of the range: S, MS, M, MT, LS, L and XL. Short and tall sizes change length only (arms, legs and torso); the width stays the same. MS, M and MT share the same chest, waist and hip measurements, so you can match your height without changing the width. LS does the same for L.

Chest zip or back zip wetsuit?

The Men's 3/2mm Steamer V3 is a chest zip. A chest zip lets less water in than a back zip and leaves the back panel free to stretch when you paddle. Ours uses a YKK zip with an internal seal panel.

What are GBS seams on a wetsuit?

GBS means glued and blindstitched. The panels are glued, then stitched without the needle going all the way through the neoprene, so there are no holes for water to come in. On the V3 the seams are also taped inside.

What wetsuit should I wear each month?

As a general guide based on average water temperatures, wear a 3/2mm steamer when the water is about 14–20°C, and a 1.5mm wetsuit top when it is about 20°C and above. Some months sit right on the line, so either can work depending on the day or the time of day. Go with what feels right. See what to wear each month for surf spots in Australia and the US.

The Full Range